in stock
Peel and Stick Tile for Backsplash Moroccan Caro Graphic Pattern Self Adhesive Decals 12x12 inch, Pack of 5
Material: Vinyl
Size: W12" / D12" / H0.12"
Color: Black&White
Application:Wall & Backsplash
Price for Box, 5 pieces/box, 1 sq.ft/piece, 5 sq.ft/box

SPECIFICATIONS
Brand | Diflart | Color | Colorful |
Chip Size | —— | Thickness | 1.5 mm |
Size | 12"×12" | Installation Method | Peel&Stick |
Weight | 1 LB | Finish | 3D |
Use | Wall,Indoor only | Material | Vinyl |
Mash | Fiberglass | Style | Square |
Application | Backsplash,Interior Wall,Shower Wall,kitchen wall | Coverage | 5 sq.ft. |
PRODUCT FEATURES
Virgin vinyl material with a textured low Lustre finish and permanent adhesive makes tile durable. Peel and Stick Tile is safe for walls with no sticky residue. Can be used on any smooth and flat surface.Resistant to heat, water, and humidity. No discoloration, no peeling after installation.Stylish and delicate appearance, adding fashion and elegance to any spaces of your rooms.
PRODUCT DETAILS
Moroccan Caro Graphic Pattern Peel and Stick Tile
INSTALL INSTRUCTIONS
- Step 1
Clean the surface on which the tiles are to be pressed with sugar soap to remove all grease and other residue Make sure the surface is completely clean and dry before commencing the tiling.
- Step 2
Measure the whole area to be tiled and lay the tiles out on a table or floor to replicate the area. Then you can be sure you have enough tiles for the job plus a littie left over in case of mishaps.
- Step 3
Start by measuring the surface for the first tile and marking for exact placement. Use a level to manage the correct positioning.
- Step 4
For oblong shaped tiles cut off the protruding tongues of the starting tile.
- Step 5
Cut the tile to size with scissors or utility knife
- Step 6
Peel the backing film from the tile.
- Step 7
Place the tile in position without pressing heavily until you are happy with the positioning. Then press down firmly, smoothing as you go.
- Step 8
Lay the next tile next to the first tile to coincide with the grout line. For oblong shaped tiles always overlay the projecting tongues on the preceding tile
- Step 9
Use your measuring tape and utility knife to measure and cut tiles to fit corners and around tricky spots like pipes. You can use a sheet of cardboard as a template to mark the spaces and cut out the holes. Then mark the spaces on the tile and cut the tile accordingly.
- Step 10
Continue the installation till the job is completed
MATERIALS YOU NEED
Cleaning cloth
Sugar soap
Ruler or tap measure
Plumb bob or level scissors
Utility knife
Silicone sealant
HOW TO MAINTAIN
Clean with a damp cloth
Do not use harsh chemicals or abrasive products
A mild detergent like baby shampoo is a good choice.
HOW TO REMOVE
Warm the tile surface with your hair dryer
Start the peel in the corner of each tile
Peel the tile away gently
Remove remaining glue with an ammonia solution
NOT TO BE USED ON
Table or counter top Floor
Shower walls
Freshly painted surface
Do Not use On
(allow minimum 3 weeks tor paint to dry)
WARNING
Never install these tiles close to extreme heat or close to flames
AFTER-SALE SUPPORT
- EXCHANGE
If the merchandise you ordered were damaged during transportation, please contact with us within 3 days and we will send you a free replacement ASAP.
- RETURN
If the return is the result of quality problem, we'll refund your return shipping costs and order costs. If the return is not a result of Diflart error, the return shipping costs will be deducted from your refund.