Out of stock
Asian Statuary (Oriental White) Marble with Gold Mirror Pearl WaterJet Mosaic Tile
Material: Asian Statuary ( Oriental White) + Gold Mirror + Pearl
Size: W 11.2" / D 8.4" / H 0.39" (10mm)
Color: White + Gold
Application: Floor | Wall
Price for Box, 1 sheets/box, 0.65 sq.ft/sheets

SPECIFICATIONS
Brand | Diflart | Color | White with Gold |
Chip Size | —— | Thickness | 10mm |
Size | 11.2"×8.4" | Origin | Asian |
Weight | 12 LB | Available Finish | Polished |
Use | Wall&Floor,Indoor only | Material |
Asian Statuary/Oriental White, Gold Mirror and Pearl |
Mash | Fiberglass | Style | Water Jet |
Application | Backsplash, Interior Wall, Shower Wall, Interior Floor | Coverage | 0.65 sq. ft. |
PRODUCT FEATURES
Beautiful Statuary White marble is paired with golden mirror and shell. Arrange fan patterns in a well-proportioned way. Adoption of delicate small particles edge ornament. Creates a holy and elegant artistic atmosphere. Bring a look of understated class with just a hint of glamour into your home. Suitable for kitchen backsplash, shower wall, interior wall & floor.
PRODUCT DETAILS
Asian Statuary Marble with Gold Mirror Pearl Mosaic Tile
INSTALL INSTRUCTIONS
-
SUBSTRATE
Before you start tiling, make sure that whatever surface the tiles are being installed to will be strong and structurally sound. Cement board, concrete or drywall is best, as these surfaces can handle the moisture of the tiling process. Plywood should be avoided, since the wood will warp with the added moisture and it will also be less waterproof, even after tiling.
-
MATERIAL INSPECTION
Natural stones are products of nature; therefore, variations in color, pattern, texture, and veining will occur. Verify all products before installation for any damage or defects such as chipped edges, broken pieces. No adjustment will be made after installation.
-
INSTALLATION
We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.
Apply as much adhesive as can be covered within 10-15 minutes.
3/16" or 1/4" square notch trowel should be used when installing our marble material and ridges should be smoothed down with the flat side of the trowel prior to fixing the tiles in the mortar bed.
-
GROUTING
To prevent scratching, Non-Sanded grout is ideal for all natural stone. In the event that your grout joints are larger than 1/8”, you should mix Sanded and Non-Sanded grouts for added density. Prior to grouting, test an area to make sure the stone surface will not scratch.
Grout joints should be packed full and free of voids and pits.
Clean excess grout as the work progresses before it has hardened completely.
Acids should never be used for cleaning grout haze.
Use a damp sponge for the final cleaning and to smooth out the grout joints.
We highly recommend applying grout release prior to grouting the tile to facilitate cleaning and for protection against staining from contrasting color grouts.
-
CUTTING
Use a wet-saw with a new, continuous rim diamond blade specifically designed for cutting marble. Do not use “turbo” or other notched blades designed for use with porcelain or ceramic as the teeth can cause a coarse cut, resulting in a heavily chipped edge.
-
CARE AND MAINTENANCE
For normal care and maintenance of stone tiles, clean stone surfaces with a few drops of neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water. Use a clean soft cloth for best results. Too much cleaner or soap may leave a film and cause streaks. Do not use products that contain lemon, vinegar, or other acids on marble or limestone. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. Do not use any abrasive cleaners.
AFTER-SALE SUPPORT
-
EXCHANGE
If the merchandise you ordered were damaged during transportation, please contact with us within 3 days and we will send you a free replacement ASAP.
-
RETURN